Schön TL-7522HC-W Instrucciones De Instalación página 5

C
J
2
J
Contact Schön at (800) 880-8164 or visit www.schonsimplymodern.com. Copyright ©2015, World Imports Decorative Plumbing. All rights reserved.
Unscrew the tightening nut (1) which is attached to the top push
1.
button's (C) body.
1
Insert the push button body (C) through the tank lid hole. Tighten
2.
with the tightening nut (1).
Adjust threaded rods using locknuts so that the rods are positioned
3.
just over and slightly touching the top of the flush mechanism.
NOTE
This comes preset and does not need to be adjusted.
1.
Connect the water supply line (not included) between the tank (A)
A
and shut-o valve. Tighten the tank connection coupling nut ¼ turn
beyond hand tight. DO NOT OVERTIGHTEN THE TANK CONNECTION.
2. Turn on the supply valve and allow the tank (A) to fill.
3.
Check for leakage at all connections and tighten or correct as needed.
1. Line up the holes in the toilet seat (B) hinge bases with the holes
behind the toilet bowl (A).
B
2. Insert the locking bolts (J) through the hinge base and toilet bowl (A).
J
1. Tighten the locking bolts (J) with a screwdriver, turning clockwise.
B
2. Close the bolt covers (1) by clicking into the small holes in the hinge
bases (2).
1
1-Piece High Efficiency Toilet
CAUTION
Do not push down on the seat with force, as this may damage the
slow-close mechanism.
PAGE 5
Installation Instructions