NKD Extreme Manual Del Usuario página 5

EN
warranty is not covering defects originated in improperly use such as incorrect assembling, careless handling,
modified in any way, or common wear out.
Warranty adjustments:
Warranty claim is solely coming into effective with proof of purchase. Due to that it is
absolutely necessary to keep your receipt. In case of warranty claim NKD™ or the responsible dealer is deciding if
the product will be repaired or replaced.
Scooter assembly
(Ensure all wrapping and packing materials are taken off your scooter before you start)
Slide the handlebars into the clamp, ensure the fork and bars are lined up before doing so. Avoid twisting/turning
the bars as you slide it down. Doing so may loosen the compression. Ensure both the bars and the clamp are
touching the top of the headset.
When you are satisfied that your front wheel and your handle bars are in line. Use your 6mm allen key, to tighten
the bolts from the bottom up. Do this by turning the allen key in a clockwise rotation. Repeat this action until the 4
bolts are tightened securely. Take care not to overtighten your clamp bolts. Failure to tighten or install properly
may result in loss of control and injury. If you have trouble understanding these instructions, seek assistance from a
qualified mechanic.
5