Deuba CASARIA 994195 Instrucciones De Montaje página 7

7
Make sure this product is fully assembled before usage, as shown in the
illustration. Ensure that all legs are in contact with the floor and that
your product is securely placed on the floor. Check that all screws and
bolts are tight and inspect them regularly.
Do not overtighten the screws, overtightened screws can damage the
material and cause cracking.
Keep away from small children, risk of injury!
Rattan
Your new rattan braid product has a pre-treated steel/aluminum body. The frame is
pre-treated and powder-coated for maximum durability. Unpack all parts and elements
of the set and place the components on a clean surface. Be careful not to scratch the
floor. This product should only be used on a firm and level surface. We recommend
mounting the product where it will be used later. Rattan products are designed to be
used with appropriate cushions or pads. Use without seat cushions or pads may result
in damage.
Plant pots: The inserts are already pre-drilled for you and can be closed as desired with
the enclosed stopper. (See picture)
If necessary, drill additional holes with a suitable drill. Tip: Drill slowly and controlled at
low speed.
We recommend gluing several strips of adhesive tape over the drilling area before
drilling.
Protect your product from rain and weather effects. Store your product in a dry and
protected place during periods of frost and winter. We recommend using a suitable
protective cover! You can find it in our Online Shop.
If you do not carry out regular care and maintenance, the service life of your product
will be considerably reduced. We cannot accept any liability for consequential damage
resulting from lack of maintenance and care.
www.DeubaXXL.de