Motion CM-08 Manual De Instrucciones página 24

25
Top-down/bottom-up (bottom rail)
Top-down/bottom-up blinds are powered by two motors: one for the bottom rail
and one for the middle rail. The motors need to be programmed individually: first
the bottom rail motor and then the middle rail motor.
Pair the bottom rail motor to an empty channel
25.1
on the remote. (see step 5)
Centre
Check the direction of rotation of the bottom
25.2
rail (see step 6) and move the bottom rail
to the desired top position. Simultaneously
hold the centre and the down button on the
remote until the blind stops stepping and
starts stepping again. The top position has
been saved
MOTION CM-08 LI-ION END MOTOR
Down
25.3
Centre
Move the bottom rail to the desired bottom
position. Program the bottom position of the
bottom bar. Simultaneously hold the centre
and the up button on the remote until the blind
stops stepping and starts stepping again.
The bottom position has been saved
Up