FIGURE 2
3
Step 2:
Insert the rear seat (#1) into the front seat (#3). Fasten
them together by using screws (#8). See Figure 2.
FIGURE 4
15
Step 4:
Place cushions (#14 and #15) onto the lounge. Secure
the cushions to the lounge by using the plastic clamps.
See Figure 4.
Warranty
• This product is covered by Courtyard Creations Inc.'s one–year limited warranty.
• Proof of purchase (dated register receipt) is required for warranty claims.
• It remains the customer's responsibility for freight and packing charges to and from the service center.
No Need To Go Back To
The store where you made your purchase
does not stock parts for this item.
whether they are missing or damaged,
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
V-3
1
8
14
STOP!
Missing A Part?
The Store
If you need parts,
Call Toll Free:
TEL: 1-877-539-7436
FAX: 1-877-539-7439
For further assistance,
please visit us at
service.cci@polywares.com
DO NOT RETURN TO THE STORE!
STOP
FIGURE 3
Step 3:
Fasten the back assembly (#4) to the rear seat (#1) by
using bolts (#6), washers (#9), and plastic nuts (#10).
Make sure that all of the bolts have been tightened
completely. See Figure 3.
Cleaning and Maintenance
• Wash frame and fabric parts with mild soap and water,
rinse thoroughly, and dry completely. Do not use bleach,
acid, or other solvents on the frame or fabric parts.
• The cushions may be washed on the surface by only
using mild soap and water or commercial foaming
upholstery cleaner if necessary. If washed, rinse well
and hang to dry. Do not machine wash or dry.
• We recommend the use of furniture covers when not
in use.
• Inspect and tighten all bolts and fasteners on a
regular basis to ensure the proper performance and
safety of your lounge.
• In order to prolong the life and beauty of your lounge,
we recommend that it be stored in a dry and protected
area during the off season periods.
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL OF THE PARTS, MAKING SURE THAT
YOU HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
PAGE 2 OF 2
1
4
10 9
45
#6
BOLT
M6*45
6