Bowers & Wilkins Contractor Serie Manual Del Usuario página 14

Frequency response
Nominal impedance
Crossover frequency
Min depth required
B&W Loudspeakers Ltd. reserves the right to amend details of the specification without notice in line with technical developments. E&OE
CWM200
Drive units 1x 25mm (1in) high-frequency
1x165mm (6.5in) mid/bass
50Hz – 20kHz ±3dB
Sensitivity 89dB spl (2.83V, 1m)
8Ω
3.5kHz
Recommended 20W – 130W continuous into 8Ω
amplifier power on unclipped programme.
Frame size Height : 306mm(12in)
Width : 219mm(8.6in)
Cut-out size Height : 283mm(11.1in)
Width : 196mm(7.7in)
73mm (2.9in) from wall surface
Net weight 1.3kg (2.9lb)
Finishes Semi-matt white suitable for
customising or pre-painting
Copyright © B&W Loudspeakers Ltd. Printed in Taiwan.
B&W Loudspeakers Ltd, Meadow Road, Worthing, BN11 2RX, England
Tel: +44 (0) 1903 524801 Fax: +44 (0) 1903 524725
http://www.bwspeakers.com