Phone - TUBI T4 Guia Del Usuario

4.7.2 Phone

Ø
Call setting
You can choose to set the call waiting, sending this phone number, any key to answer, call time
reminding, automatic redial, automatic answer, answer reminding, cost setting, IP number and call group
of card 1 and card 2.
——Call waiting: Switch on/off call waiting function. And choose inquiry to check current call waiting
state.
——Call identity: Select on or off sending native number.
——Any key answer: Select on or off any key answer.
——Minute reminder: Select set call time remind.
——Auto redial: Set on or off automatic replay.
——Auto answer: Set on or off automatic answering (Note:headphones mode supports this feature).
——Answer reminder: Set a reminder when answering.
——Cost settings: For phone card settings.
——IP number: Set the IP number.
——User group: Conversation group settings.
Ø
Call divert
Divert all voice calls: under this function, all incoming calls will be diverted into the phone number you
have set.
Divert if unreachable: under this function, incoming calls will be diverted into the phone you have set.
Divert if no answer: under this function, incoming calls will be diverted into the phone you have set.
Divert if busy: under this function, incoming calls will be diverted into the phone.
Divert all calls: divert if incoming call is digital. (supplier's support needed.)
Cancel all divert: cancel all call divert.
Ø
Call barring
Outgoing calls: prohibit out –going number.
Incoming calls: prohibit incoming call.
Cancel all: cancel the set restriction(PIN2 needs inputting)
Change barring password: modify password.
Ø
Network settings
Select the card 1 or 2 of the access card , according to choices are following:
――Preferred list：Enter the settings take precedence network.
――Net selection mode: By automatically or manually select a carrier.
— —Airplane mode: Set the cruise mode on or off.
Ø
Switch mode
Select the double card mode, only the card 1 or 2 standby mode only card.
Ø
Default SIM
You can set the default setting as SIM card 1 or SIM card 2.
Ø
Speed dial
You can set the number you want to dial fast through this function. When you have set it, you can use the
mode of number key+ dial key in the dialing interface to achieve fast dial.
55