General Description; Parts And Components - WAGNER painteater Manual Del Propietário

Ocultar thumbs Ver también para painteater:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

GeneraL deSCription

The PAINTEATER™ is an excellent surface preparation tool when preparing solid wood, wood
siding and masonite siding for paint. do not use painteater™ on textured siding or
shakes.
The PAINTEATER™ has been designed to perform a number of tasks associated with surface
preparation. It will remove paint chips and feather the paint edges; it can be used to remove
paint oxides and mildew; and will abrade the painting surface and provide for excellent paint
adhesion. The PAINTEATER™ is the perfect surface preparation tool for large, flat, solid surfaces.
iMportant:
This tool is intended for outdoor use only on solid wood, masonite siding,
wood siding, concrete and steel for paint preparation. If the surface you
want to prepare for paint is rotted or damaged, it should be replaced.

partS and ComponentS

Strap
Red disc
lock button
Disc*
*Replacement discs: P/N 0513041
(not to be used with anything other than the PAINTEATER™)
hand poSitionS
See the graphics below for the different options for hand placement when using the
PAINTEATER™. The PAINTEATER™ can be used whether you are right- or left-handed.
8
ON / OFF switch
(O = off / l = on)
Folding handle
Red handle lock button
notiCe - squeeze red buttons on both
sides of handle base to unlock. handle
will lock into place when fully vertical
or horizontal.
EN
specifications
Amps ...................................3.2
volts...............120vAC, 60Hz
RPM..................................2600
Disc size ................4.5 inches

Publicidad

Tabla de contenido
loading

Tabla de contenido