FAN HEATER
INSTRUCTIONS FOR USE
Dear customer, IMETEC thanks you for purchasing this product. We are certain you will
appreciate the quality and reliability of this appliance, designed and manufactured with
customer satisfaction in mind. These instructions for use have been drawn up in accordance
with European standard EN 62079.
ATTENTION!
Instructions and warnings for a safe use.
Please read the use and safety instructions before using the
appliance and follow these at all times. Keep this manual and
illustrative guide with the appliance for future consultation.
Should you pass the appliance on to another user, make sure to
also include this documentation. Should certain parts of this user
manual be difficult to understand or should doubts arise, contact
the company before using the product, at the address indicated on
the last page.
Illustrative guide
Technical data
After having removed the appliance from its packaging, verify its integrity
based on the drawing and check for any damage caused during transport. If
in doubt, do not use the appliance and contact the authorised service centre.
Do not let children play with the packaging! Keep the plastic wrapping out of
the reach of children; risk of suffocation!
Before connecting the appliance, check that the mains voltage data reported
on the identification plate corresponds to that of the available electric mains.
The identification plate is attached to the appliance.
This appliance must be used only for the purpose for which it was designed,
that is as a FAN HEATER (convector) for home use. Any other use is improper
and potentially dangerous.
MI000853.indd 5
CONTENTS
SAFETY WARNINGS
GB
Page 5
Page 6
Page 7
Page 7
Page 7
Page 8
Page 8
Page 8
I
II
04/03/12 10.53