Front Panel; Power Led - Work Pro LM-3R Manual De Usuario

LM-3R
The web interface allows to change the IP Address, the Subnet Mask and the description of the device.
If the IP Address is modified, it is very important to remember the new one, in order to can connect the next
time you access the web interface. Anyway, the EQDiscover utility can be used in order to obtain the
network settings of the device. All you have to do is connect the LM-3E to the LAN or to your computer, and
execute the application. It will show, in a window, all the information about the network settings of the device.
EQDiscover utility can be downloaded from
Fig.1 The integrated WEB SERVER allows the
configuration of the unit

2. FRONT PANEL

1. POWER LED

This LED, in red color, will iluminate when there is power currently being supplied to the unit.
2. Main Supply (PLUG IN)
With an external 5V DC, 500 mA power supply, it is possible to supply the unit. (If you use PLUG IN
connector to supply the unit, don't use Terminal Block connector)
3. ACT LED
This green LED blinks when the Ethernet port is connected and is transmitting or receiving data.
LM-3R User Manual
Ethernet to DMX converter
http://www.equipson.es/prodDetail.asp?idproducto=737
EN
4