Tabla de contenido
Publicidad
Model Series 3000
General Specifications
contd.
POWER METER (Band 2 only):
Frequency Range:
Power Range:
Damage Level:
Accuracy:
Resolution:
Measurement Time:
Display:
TIME BASE, Standard TCXO (See Options 112, 120, and 125 for other):
Frequency:
Aging Rate/second:
Aging Rate/year:
Retrace:
Temperature stability:
MAINS change (± 10%):
Calibration Schedule:
INTERNAL/EXTERNAL REFERENCE OSCILLATOR:
10 MHz REF OSC OUT:
Connector:
EXT REF OSC IN:
Connector:
GPIB / IEEE 488:
Programmable
Functions/Controls:
ENVIRONMENTAL: Designed to meet MIL-PRF-28800F Type III, Class 3, Style E
and IEC 1010-1, Specifically:
Operating Temperature:
Storage Temperature:
Relative Humidity:
Altitude:
Vibration (random):
Burn In:
Pollution Degree:
Transient Overvoltage:
The XL Model 3000 series counters do not contain nor require a cooling fan.
RELIABILITY:
MTBF:
MTTR
:
ACM
3000/98MAR01
GENERAL INFORMATION
120 MHz to 3 GHz (Model 3030)
120 MHz to 8 GHz (Model 3080).
120 MHz to 12.4 GHz (Model 3120).
120 MHz to 20 GHz (Model 3200).
120 MHz to 26.5 GHz (Model 3260).
-35 dBm or counter sensitivity, whichever is greater to + 10 dBm max.
+ 25 dBm
± 1 dBm to 26.5 GHz (typical).
0.1 dBm
Frequency measuring time + 15 ms.
Simultaneously displays frequency (with 0.1 MHz resolution) and Power.
10 MHz
-9
≤ ± 5 parts in 10
/√τ (root Allen variance).
-7
≤ ± 7.6 parts in 10
.
-7
≤ ± 5 parts in 10
after 24 hrs.
-6
o
≤ ± 1 part in 10
(0
C to 50
-7
≤ ± 4 parts in 10
One (1) year.
10 MHz, 1 Vrms into 50 Ω, AC coupled.
BNC female (rear panel).
External time base accepts 1 MHz, 2 MHz 5 MHz or 10 MHz time base
signal, 0.2 Vrms to 5 Vrms. Automatically disconnects internal time base
if external signal is > 0.2 Vrms.
BNC female (rear panel); 1 kΩ impedance.
BAND 1, BAND 2, RESET , STANDBY , POWER METER,
∆F, DISPLAY TIME, RESOLUTION.
o
o
0
C to 50
C.(standard CW) / 0°C to 40°C (Battery Option)
o
o
-40
C to 71
C (w/o battery) / -10°C to 40°C (w/battery).
o
o
95% ± 5% 10
C to 30
C;
o
75% ± 5% to 40
C;
o
45% ± 5% above 40
C.
4600 m (15,092 ft.).
5–500 Hz.
Failure-free burn in of no less than 100 hours at 40
1 (no pollution)(IEC 1010-1/3.7).
Installation Category II (IEC 1010-1/J)
Mean Time Between Failure = > 32,000 hours (MIL-HDBK-217E).
Mean Active Corrective Maintenance Time = 30.92 minutes
(MIL-HDBK-472).
, 24 hrs.
, 3 hrs.
ON
OFF
ON.
o
C).
o
C (w/o battery).
Chapter 1
1-6
Publicidad
Tabla de contenido
