Fonax FNX-HDCO Guía De Instalación Rápida página 6

PHONE SETUP
PC LAN D C 1 2 HEADSET HANDSET
Installing the Phone (Wall Mount)
1 Attach the wall mount to the slot on the back of the phone.
2 Attach the phone to the wall via the wall mount hole.
3 Pull out the tab on from the handset cradle (See gure below).
4 Rotate the tab and plug it back into the slot with the extension up to
hold the handset while the phone is mounted on the wall (See gure
below).
Slots for the
wall mount and
phone stand
Handset rest
Tab with extension up
Tab with extension down
Installing the Phone (Phone Stand)
For installing the phone on the table with the phone stand, attach the phone
stand to the bottom of the phone where there is a slot for the phone stand
(upper part, bottom part).
CONNECTING THE PHONE
PC LAN D C 1 2 HEADSET HANDSET
To setup the FNX-HDCO, follow the steps below
1 Connect the handset and main phone case with the phone cord.
2
Connect the LAN port of the phone to the RJ-45 socket of a hub/switch
or a router (LAN side of the router) using the Ethernet cable.
Connect the 12V DC output plug to the power jack on the phone; plug
3
the power adapter into an electrical outlet.
4 The LCD will display provisioning or rmware upgrade information.
Before continuing, please wait for the date/time display to show up.
5
Using the phone embedded web server or keypad con guration
menu, you can further con gure the phone using either a static IP or
DHCP.
PC Port
LAN Port
Power
Headset Port
Handset Port