Mary Read Britebox Instrucciones De Uso página 7

OK, you are now ready for your first
treatment...
Make sure that the LED light source is approximately 8 inches (20cm) away from
the area to be treated.
Turn the britebox on by depressing the switch on the front of the unit. The LEDs
will light, and your session begins. The britebox will
automatically time 15 minutes and turn off. This marks the end of your treatment
session. The fans will start when the britebox is up to temperature.
Relax for 15 minutes and let the britebox do the work...
After all treatments it is recommended that you moisturise.
For more Mary Read treatments please visit www.britebox-led.com
Maintenance
1. Always disconnect the unit from the mains when not in use.
2. Always unplug the britebox and let it cool down before any cleaning or main-
tenance. (No user serviceable parts inside).
3. Only clean the outside of the box with a damp cloth and use only a dry cloth
to clean the LED panels.
4. For maintenance please contact Mary Read support department on +44 (0)
1949 838383
Please note:
Do not use near water or within damp environments.
Keep all vents and fan covers clear from any obstructions.
Only use the goggles supplied.
Only use the enclosed power supply
Warranty & Guarantee
All Mary Read products come with a 60 day money back guarantee.
The britebox have a 2 year parts and labour warranty.
5