Getting Started - Spypoint LINK-MICRO-LTE Guia De Inicio Rapido

Getting started

SELECT A POWER SOURCE
•
Lithium or alkaline AA batteries
•
12V rechargeable battery (#KIT-12V)
•
3.7V rechargeable battery pack (#LIT-10)
We recommend using the SPYPOINT #LIT-10
NOTE:
rechargeable lithium battery pack, sold separately.
FOR BEST RESULTS AND NO LEAKAGE:
•
Use only new lithium or alkaline batteries.
•
Do not mix old and new batteries.
•
Do not use rechargeable AA batteries
(their lower voltage can generate operational issues).
HOW TO INSTALL AA BATTERIES PROPERLY
•
Unlock and open the LINK-MICRO-LTE door.
•
Take the battery holder out.
•
Insert the AA batteries into the battery holder
following polarity (+) and (-) indications.
•
Place the battery holder back into the battery compartment.
FORMATTING YOUR M
Before inserting the MicroSD card into your camera, it must be
reformatted via a computer to ensure proper functionality.
Memory card is sold separately. Whether you choose to use a MicroSD
card you previously used in another device or a brand new one you've
just bought, its capacity must not exceed 32 GB and it must be
reformatted. Do no use the "Quick format" option.
INSERTING A M
•
Ensure the camera is turned off.
•
Insert a MicroSD memory card (up to 32 GB capacity)
into the MicroSD card slot with the label facing up.
•
The card is inserted correctly when a click is heard.
4
SD CARD
icro
SD CARD
icro