GRUPPO PIAZZETTA Wi-Fi System Instrucciones De Instalación página 4

WI-FI SYSTEM
A
B
1
2
3
A) Power cable
B) Serial cable
C) Wi-Fi System unit
1) Power LED
2) Server connection LED
3) Wi-Fi network LED
4) Internet communication LED
5) Reset button
INSTALLATION
- Installation requires:
• appropiate computer skills
• a good internet connection at the place where the device is installed
• make a note of the home network username and password.
- Connect cable (A) to unit (C) and the power supply in your home.
- LEDs light up. If they do not light up, press the "Reset" button
(5).
- The unit (C) now acts as a Wi-Fi hotspot.
- Activate the Wi-Fi connection in the settings of your device (PC/
smartphone/tablet).
- In the list of networks found, search for the unit (C) network and con-
nect to it from your device.
4
C
4
5
DT2003350_H07033720_03
- Open your device browser and connect to the address "192.168.1.1"
for unit (C).
- Click on "WiFi Configuration".
- Select your home Wi-Fi network,
- If your WiFi network is hidden, enter the name in the "SSID" field.
- Enter your home Wi-Fi password and press "Connect".
- Press "OK" on the window "Connection might be lost" and continue:
this is not an error notice but the normal procedure.
- Unit (C) is no longer connected to your device (PC/smartphone/tablet):
the "Piazzetta..." network is not longer visible.
- Wait for LEDs to light up.
- If LED flashes, the device has not been connected (for example, an
incorrect password has been entered). Press the "Reset button" (5) on
unit (C) and enter the correct password under "WiFi Configuration".
- If LED is on and LED is off, open the TCP1857 port on your router.
- If the TCP1857 port on your router is open but the problem persists, con-
tact your provider to check the presence of any other blocks (TCP1857
port closed by the provider).
- If this does not happen, contact your home Wi-Fi service provider.
- Connect cable (B) to unit (C) and the stove serial port.