Publicidad
DOOR REMOVAL/ REVERSAL (OPTIONS)
Options
Opciones
Options
WALL MOUNTING – RACK ER12W ONLY
Mount RACK ER12W to wall using wall hinge.
Wood Stud Installation:
1. Drill 7/32" pilot holes, 2.75" deep
2. Use Lag Bolts (item K) to attach rack to wall
Solid Concrete Installation:
1. Drill 3/8" pilot holes, 2.75" deep
2. Insert Anchors (item L) into pilot holes
3. Use lag bolts (item K to attach rack to wall
Door can be removed or reversed to open from opposite
side of rack enclosure. (note- door will need to be
rotated 180 degrees (flipped) to switch door orientation)
P6
Publicidad
