Micro Sd Card Slot; Charging; Initial Setup; Power On/O - Epik Learning HIGHQ ELT10101H Guia Del Usuario

Micro SD Card Slot

Your tablet is equipped with a micro SD memory card slot. You can use a micro
SD memory card (sold separately) for additional storage of music, photos, files,
etc. When inserting a micro SD memory card, insert as illustrated. Be careful not
to insert it at an angle as doing so may cause damage to the tablet or memory
card. To remove the card, press firmly and the card will pop out. It is
recommended to eject the micro SD card only when the tablet is powered o .

Charging

Use the included USB cable and AC adapter to charge the tablet. Other
chargers may cause damage. Do not use the charger in a humid environment.
Do not allow the charger to come in contact with liquid or moisture. Plug the AC
Adapter into the outlet, then connect the micro USB connector to the tablet.

Initial Setup

To get started with your new HIGHQ Learning Tab, ensure that your tablet has
TM
been fully charged before the first use. Press and hold the power button for 5
seconds until you see the HIGHQ Learning Tab logo on screen. Allow 1 minute
TM
for the tablet to power on. You will be prompted to start the initial setup process.
Power On/Off
To power on your tablet, press and hold the power button for 5 seconds.
To put your tablet in sleep mode, press and release the power button. This
mode is best if you will use the device again soon.
To power o your tablet, press and hold the power button for 2 seconds, then
tap Power o . This is best when the tablet will not be used for a longer period
(more than a few days).

Before starting

Make sure a Wi-Fi connection is available.
We recommend using a Google Account
(or Gmail) with your tablet. If you do not
have one, this guide will help you sign up
for a free Google Account.
5