Anti-Theft Device; Operating The Device; Heating Food - MedicPro NUK Instrucciones De Operación

4.3 Anti-theft device

To stop the bottle warmer from being stolen,
attach an anti-theft device (e.g. notebook
lock) to the lock 9.

5.1 Heating food

Notes:
• All NUK bottles from the 45 ml hospital
bottle to the 260 ml Nature Sense bottle
are compatible with the bottle warmer.
• The device is designed to heat one bot-
tle.
• The device should be at room tempera-
ture before starting it up for the first time.
• The bottle should be filled to at least 30%
of its specified maximum capacity as the
temperature may not otherwise be meas-
ured correctly. An 80 ml bottle for exam-
ple should contain at least 25 ml liquid.
With very small quantities of food, please
select a small bottle.
• Do not add water under
any circumstances as the
device functions
infrared heating, not water,
for hygiene reasons.
1. Connect the device to the
mains power supply.
2. Place the bottle with the
food in the bottle warmer
2.
3. Make sure that the bottle is positioned
above the temperature sensor 4.
4. Hold down the operating
button 5 for at least 1
second.
The LED indicator 1 lights
up blue.
The food is heated.

5. Operating the device

!
with
1
2
During the heating phase
the infrared
switches on and off sev-
eral times. This is part of
the procedure and is not
a fault.
5. Wait until the indicator
switches to green.
The food is now at the
feeding temperature.
6. Take out the bottle.
As soon as the bottle is
taken out, this is regis-
tered by the bottle detec-
tion system. The device
switches off and is cooled
down by the built-in fan.
7. Check the temperature of the food
before feeding Baby.
If the temperature is too low, the bottle
can be heated up further in the bottle
warmer.
If the temperature is too high, allow the
food to cool down slightly.
8. If you put the bottle back in the bottle
warmer to heat up further, hold down the
operating button 5 again for at least 1
second.
If the bottle is not taken out directly, the
temperature sensor 4 will continue measur-
ing the temperature and reheat the bottle
automatically to consistently maintain it at
feeding temperature for 30 minutes. The
LED indicator 1 remains green in this case.
22
3
heater
4
37°C
5