RECOMMENDED TOOLS AND MATERIALS
Putty Knife - Flat screwdriver - Adjustable wrench – Sealant -
Tape measure - Hacksaw - Carpenter's level.
(*) Not included
INSTALLATION INSTRUCTIONS
1
Check the height of the water supply and drain.
Table
Supplies
200
(7 7/8")
Finished floor
(*) Dimension shown for location of supplies and trap
are suggested
3
Mount the faucet (no included) on the table or wall.
Apply sealant (not included) to the lavatory bottom surface.
Clean or wash with soapy water. Wash off the soap with clean water and dry with a soft cloth. Never use abrasive products
or materials which could damage the surface. Doing so will void warranty. Do not use cement or rigid plasters.
INSTALLATION INSTRUCTION
ABOVE COUNTER LAVATORY
750
(29 1/2")
(*) 600
(*) 550
(23 5/8")
(21 5/8")
ROUND
CAUTION
This product is heavy and fragile,
To avoid breakage and possible injury,
it should be handle with care.
Do not use putty or cement.
2
Mark and cut opening around the table. As listed in the chart.
80
(3 1/8")
A
(**) 550
(21 5/8")
Ø130
(5 1/8")
(**) Dimension shown for locationof lavatory
4
Place the lavatory (take as reference the TREBOL logo
according to the image), press down firmly. Install the drain
without overflow. (*) (not included)
Customer Service
TREBOL-CELIMA
Telf
acliente@celima.com.pe
www.celima-trebol.com
LUNA
195 (7 5/8")
PRIANO
218 (8 5/8")
is suggested.
5
Apply sealant (not
included) around the
lavatory)
(*) It´s recommended to install
with drain without overflow.
. : (511) 614-0303
A