Eleyus LUNA 70 Instrucciones Para La Instalación Y El Uso página 18

★Use 1×ST5×50 screw to fix the body to the wall.(See fig 3)
Before the body fixing,take the aluminum filter out of the body first,drill
one hole on the wall by aligning the hole on the back of the body already
and insert one expansion plug into it.
E. Installation of Chimney
★Lower chimney installation
Use 2 x M4×10 screws to fix the lower chimney to bracket B and then use 2 x
M4×10 screws to fix the lower chimney to the hood which has been mounted on
the wall.
★Upper chimney installation
Use 4 x M4×10 screws to fix the upper chimney to bracket A
Note: The product must be installed using at least one of the two chimneys
For one chimney (the lower one) installed, bracket B must be fixed on the wall.
However, bracket A is not required to be fixed on the wall.
For two chimneys (both the lower and upper one) installed, bracket A must be
fixed on the wall and bracket B must be fixed to the cooker hood. However, fix-
ing bracket B on the wall is optional.
Controls and circuit diagram
Using the electronic controls (see Fig.4)
1. When the hood is connected to the electricity supply it emits a brief sound.
All the indicator lights of the touch switches switch on for one second and then
switch off automatically.
2.Press the "
off.
3.Press the "
indicator lights remain off. Then press switches "
will work at "low" , "Medium" and "fast" speed respectively .
4.If you press the "
ove three speeds, its indicator light will change from red to the flashing blue.
The cooker hood will be in a state of "delayed shutdown". This means it will be
switched off automatically after 3 minutes. The cooker hood will be switched
off if you press "
press " " 2 times.
" switch, the light switches on. Press it again, the light switches
" switch, its red indicator light switches on. However, the other
" switch again while the motor is working at one of the ab-
" during the "delayed shutdown". To turn off immediately,
EN.7
Fig.4
" ," " and " " , the motor