Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
How to set pressure in your new heat press
IMPORTANT: Turn off the heat press before adjusting pressure to avoid accidents.
Instructions from manufacturers of heat transfer vinyl and transfer papers will instruct you to use low,
medium or high pressure during the application process. Here's how to calibrate your machine and identify
those settings.
A) Flat heat press
1.
Turn the pressure knob counterclockwise a few times to lower the pressure.
2.
Place a piece of paper on the base and lower the heating plate.
3.
Pull the paper.
4.
If the paper moves easily, turn the knob clockwise and try pulling again until the paper doesn't
move easily.
5.
Once you the paper doesn't move then that will be your "medium" pressure.
From the "medium" setting, high pressure will be clockwise one to two turns. Low pressure will be
counterclockwise one or two turns. (The number of turns will depend on the thickness of the garment).
24
Publicidad
Tabla de contenido
