DAYRON 26068 Manual De Instrucciones página 26

Step 3: Make sure the power is connected to the fan
before using. Plug the Fan into an AC 240V~50Hz
mains outlet. Press and hold the power button for 5
seconds,. Ensure your phone is connected with
your local 2.4GHz WIFI.
Step 4: In OFF mode, press and hold the button" "for 5
seconds , the display will show"F" and until the "F"
flashes rapidly. If not, try again. The network
connection is abnormal if the indicator flashes slowly,
please check the router or network configuration.
Step 5: Click "Confirm light blinks rapidly". Type in
your WiFi password and click "Confirm" to search
device. Once the configuration is completed, the
indicator light will stop blinking rapidly.
Note: If the Smart Fan is failed to establish
connection, make sure there is no special symbol
in your WiFi name (should only contain letters and
numbers) and password, try again by repeating
Step 4 & Step 5 to set it up.
Step 6: Once connected, you can rename your
Smart Fan and select the Room (e.g. Living Room)
where your Smart Fan is located. This helps you
identify the device when you want to cast to it.
Step 7: You can tap the "Power icon" to turn on/off the
fan. Sliding Press "The blue circle" to adjust the fan
speed, Press "Oscillat" to adjust the Oscillation Press
"Sleep" ,"Boost" or "Fresh" to select your want Press
"Time" , to set 1 to 8 hours.