Finishing The Installation - Minka Aire Light Wave Manual De Instrucciones De Instalación

2/ Remote with plugs
Fig. 12

FINISHING THE INSTALLATION

emove 1 of 2 screws from the bottom of the hanger bracket (1) and loosen the other one a half
R
turn from the screw head. (Fig. 13)
Slide the canopy (3) up to the hanger bracket and place the key hole on the canopy over the
screw on the hanger bracket and turn the canopy until it locks in place at the narrow section of the
key holes.
Align the circular hole on the canopy with the remaining hole on the hanger bracket and secure by
tightening the two screws.
Attach the canopy cover (4) to the canopy and turn it clock wise to secure it.
Fig. 13
9