Publicidad
Idiomas disponibles
Idiomas disponibles
Get Started
1: Insert 4 new "AA" Alkaline batteries into the back of the clock. Observe
the correct polarity.
2: Turn the Time Set Knob in the direction of the arrows to set the hours
and minutes to the correct time. The high quality quartz movement will
keep the time once it is set.
Night Vision Light Sensor
•
On the front of the clock, there is a light sensor that reads the
brightness or darkness of the environment.
•
When the Light Sensor Switch is in the ON position, the sensor will
automatically illuminate the backlight in darkness.
•
If the light sensor is in the OFF position, the backlight will not
illuminate.
Care and Maintenance
Do not mix old and new batteries
•
Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
•
Always purchase the correct size and grade of battery most suitable
•
for intended use.
Replace all batteries of a set at the same time.
•
Clean the battery contacts and also those of the device prior to
•
battery installation.
Ensure the batteries are installed with correct polarity (+ and -).
•
Remove batteries from equipment when is not to be used for an
•
extended period of time.
Remove used batteries promptly.
•
Do not expose to extreme temperature, vibration, or shock.
•
Clean with a soft damp cloth. Do not use solvents.
•
Warranty and Support Information
La Crosse McCormick, LLC provides a 1-year limited warranty on this
product against manufacturing defects in materials and workmanship.
For warranty work, technical support, or information contact customer
support online: www.lacrossetechnology.com/support/ or write:
La Crosse McCormick, LLC Warranty Dept.
2830 26th St S.
La Crosse, WI 54601
Model: BBB87283
www.lacrossetechnology.com/support/
Page | 2
Publicidad
