Publicidad
CARE AND MAINTTENANCE
METAL PARTS (steel and stainless steel)
This product has been made with resistant materials of
the highest quality. With correct care and maintenance
you will be able to enjoy it for many years. However, dirt
or other contaminants and bad use could damage it.
Therefore, it's important to keep the product clean.
Please follow these simple instructions to keep the pro-
duct in good condition:
• To clean steel and stainless steel dampen a cloth with
warm water and use mild soap. Do not use abrasive
soap or detergent as they could scratch the surface or
make colours fade.
• Lightly rub the product with the damp cloth. Rinse the
cloth frequently, wringing out surplus water to keep it
damp. Take care to rinse the product well and then dry
it with another cloth.
• If any liquid spills onto the product, remove the stains
as quickly as possible.
• If you are unable to remove the stains, use a cloth
to apply a metal cleaner (for the INOX version of a
stainless steel cleaner) to the surface. Read the instruc-
tions carefully, testing it first on an area that cannot be
seen. Make sure you rinse it off well and then dry with
another cloth.
• For the INOX version, to remove possible rust stains
that could appear due to porosity imperfections, damp
or bad use, we recommend you directly apply rust
stain remover, testing it first on an area that cannot be
seen. Make sure you rinse it off well and then dry with
another cloth.
HPL PARTS (field)
HPL does not require special care.
• Clean with a cloth dampened in warm water and mild
soap.
• Never use abrasive soap or detergent, sandpaper or
steel wool since they could scratch the surface or make
colours fade.
• Never use furniture polish which contains wax, since
these kinds of products tend to leave a sticky layer on
the surface which attracts dust and dirt.
IROKO WOOD (legs and handles)
Iroko is a hardwood from Africa and ideal for outside
use. It is very resistant to the effects of weather and
ageing.
To care for the wood it is only necessary to remove dirt
with a soft, damp cloth and treat the wood once a year
with a restoring oil for tropical wood, following the oil
manufacturer's instructions.
IF THE PRODUCT IS USED OUTDOORS, KEEP IT
CLEAN AND IN GOOD CONDITION, FOLLOWING
THESE INSTRUCTIONS MORE FREQUENTLY.
WHEN THE PRODUCT IS KEPT OUTDOORS AND
IS NOT USED FOR PROLONGED PERIODS, WE RE-
COMMEND YOU USE THE PROTECTIVE COVER.
Publicidad
