Power Indicator - Hannto Amber M100 Instant Photo Printer Manual De Usuario

2. Wi-Fi hotspot indicator blinks for 2 seconds if the printer Wi-Fi hotspot
password is reset successfully. Reset the printer Wi-Fi hotspot password
only when printer is idle or there is a printer failure. Default password is
12345678.
3. During printing, printing will not be interrupted when the power button is
pressed.
4. During firmware upgrading, upgrading will not be interrupted when the
power button is pressed.
5. When there is a failure, press the power button to power the printer off.
Then, power the printer on again. The printer will try to fix the problem
automatically after powering on.

Power Indicator

Light off
Light on
White light blink
Breath
Note: Sleep mode starts after the printer is idle for 5 minutes. Press Power
Button or send a print job to wake the printer up.
Failure Indicator
Light off
Orange light blink
Wi-Fi Hotspot Indicator
Light off
Orange light on
Blue light on
Orange light blink Function turning on
Power off
Power on
Printing/Firmware upgrading
In sleep mode
Printer OK
Printer has failed. Follow the APP prompts
to solve problem
Function off
Function on
Connected to one or more devices
07