R/C Function Settings; Main/Sub Of R/C - eco touch RC-EX1A Manual De Instrucciones

7. R/C function settings

R/C function settings cover the following items. These settings can be done only when the unit is stopped.
(1) Main/Sub of R/C: Set the main or sub R/C . ➝ ⑧
(2) Return air temp: Set the detection method of return air temp for applying to thermo. rule*. ➝ ⑨
(3) R/C sensor: Set the operation mode to apply the temp detected with R/C sensor to thermo. rule*. ➝ ⑩
(4) R/C sensor adjustment: Adjust the temperature detected with the R/C sensor. ➝ ⑪
(5) Operation mode: Set Enable/Disable for each operation mode. ➝ ⑭
(6) °C/°F: Set which of °C or °F is used. ➝ ⑮
(7) Fan speed: Changes the fan speed. ➝ ⑯
(8) External input: Set the range to apply the external input (CNT) connected to plural indoor units. ➝ ⑰
(9) Ventilation setting: Set this when a ventilation device is connected. ➝ ⑱
(10) Flap control: Set one of 4 flap stop positions or free flap stop. ➝ ⑲
(11) Auto-restart: Set Enable or Disable of Auto-restart function. ➝ ⑳
(12) Auto temp set: Set Enable or Disable of Auto temp set function. ➝ 
(13) Auto fan speed: Set Enable or Disable of Auto fan speed function. ➝ 
* "Thermo. rule" means the "Judging to make thermostat ON or OFF" by detecting temperature.
① TOP screen
② Menu screen
③ Menu screen #2
① Tap the Menu button on the TOP screen.
②③ Main menu screen is displayed.
Tap the "R/C function settings" button on the menu screen.
— 20 —