Stone & Beam HW-F1292ST Instrucciones De Ensamblaje

ASSEMBLY INSTRUCTION FOR
ASIN #B0742FPL25
1. Screw pole (B) clockwise onto base (A) until tight , then screw pole (B), (C)
and (D) together .You may need to pull any excess cord gently through the
poles so that these two parts fit.
2. Insert tube (E) into pole (D) and use screw driver (G) to tighten nut (F) .
3. Insert tube (H) into tube (E) and use screw driver (J) to tighten nut (I) .
4. Insert socket (K) into tube (H).and use screw driver (G) to tighten nut (F) .
5. Place shade (L) onto socket (K) and tighten it with socket ring (M) .
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
---------------------------------------------------------------
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug as a feature to reduce the risk of electric shock
(one blade is larger than the other). This plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician.Do not use with an extension cord unless the plug can be fully inserted.
DO NOT ALTER THE PLUG
.
----------------------------------------------
BULB TYPE: Use only with maximum of 1*150 Watt incandescent bulb (bulb
not included).
B0742FPL25 1.0