Technical Data - mebela Apgar Manual De Instrucciones

Disposal
VIII
The Apgar Timer is of modular design. It can thus be disassembled into
its individual components. The Apgar Timer is mainly made of technical
plastics which can be disposed of in accordance with local regulations.
The LCD, circuit board, electric parts and batteries should be disposed of
separately.
Guarantee
IX
Guarantee for the Apgar Timer for 2 years after date of delivery if used in
accordance with these instructions. The manufacturer is not liable for any
damage or consequential damage caused by incorrect operation, inappro-
priate usage as well as use by unauthorized persons.

Technical Data

X
Batteries:
Accuracy:
Signal:
Time of Birth:
Display:
Operation:
Measurements:
Weight:
Working conditions: + 5 °C to + 40 °C
Storage conditions: – 40 °C to + 50 °C
The Apgar Timer fulfils standard IEC 60601-1-2 where electromagnetic
compatibility is concerned. While the Apgar Timer is in use, other equip-
ment which also fulfils this standard will not be affected nor will the other
equipment affect the operation of the Apgar Timer.
2 pcs 1,5 V AA
Quarzstability, <500 ppm
Buzzing signal after 1, 5 and 10 minutes
Time of Birth is electronically stored and can be
retrieved by pressing the birth time retrieval button.
4-digit Liquid crystal display (LCD)
2 foil buttons to start/stop the timer and to display
the time of birth
155 x 92 x 33 mm (H x W x D)
450 g
7 EN