OLSON SBS Serie Manual Del Usuario página 89

Evaporator in freezing chamber
1) Remove the air duct components in freezing
chamber.
2) Disconnect all connecting terminals.
3) Remove the welding on inlet and outlet tubes.
4) Remove two screws which are used to fix the
evaporator and remove the evaporator.
Defrost heater components on the evaporator
This defrost heater with defrost sensor and fuse can
be dismantled separately, it DOES NOT need to replace
the evaporator assembly if only heater fail to work.
Defrosting fuse
Defrost sensor
Defrost heater
1) Disconnect the connecting terminals.
2) Cut off the band.
3) Use nipper plier to unlock all metal hooks of heater
pipe, separate the components from the evaporator.
89