Installing Outdoor Unit; Installing Mounting Plate And Gasket - NGTeco DL30 Serie Guia De Instalacion

Installing Outdoor Unit

4
Attach the Gasket to the Outdoor Unit.
1)
2) Insert Spindle into the clutch. Make sure the triangle mark points towards the door
opening direction.
3) Attach the Outdoor unit to the door by inserting the cable through the drilled holes.

Installing Mounting Plate and Gasket

5
1) Attach the Mounting Plate to the Gasket and route the cable through the hole.
2)
Place the Gasket and Mounting Plate on to the door and use Screw B to secure them.
Clutch c orrect p osition:
T he triangle must be vertically centered.
Screws B
5