Silverwood FD1031-B Instrucciones Para Armar página 4

ASSEMBLY INSTRUCTIONS
3
The table is now completely assembled as
shown in step 3.
5
Attach seat frame (D) to seat legs (E) using
1-9/16" bolts (3)x4, lock washers (8)x4, and flat
washers (7)x4 as shown in step 5. Take care to
position the backrest mounts to face the bottom
of the seat. Only tighten bolts halfway.
WARNING:
The maximum weight load capacity is
65lbs (29.48 kgs). Exceeding capacity
may result in collapse and possible injury.
Backrest mount
4
You can use the table as shown in step 4 by
adjusting the table wing supports as shown.
6
Attach support tubes (F) to assembled seat legs
(E) using 9/16" bolts (10)x4, lock washers (8)x4,
and curved washers (11)x4 as shown in step 6.
Only tighten bolts halfway.
3