Cyanics BCX-300 Manual Del Usuario página 4

Turning BCX-300 on & off
Press and hold (Power) button for 2~3seconds to turn BCX-300 on and, press and hold
(Power) button for 5seconds to turn it off.
Pairing BCX-300
1. Place BCX-300 within a meter from your mobile phone and activate the mobile phone's
Bluetooth function.
2. (1) [Manual pairing mode] Press and hold
LED light rapidly flash alternately.
(2) [Auto paring mode -Easy pairing]
① Press and hold (Power) button for 2~3 seconds to turn BCX-300 on.
② When BCX-300 is turned on for the first time, it will automatically try auto reconnection
function. The function will be failed to activate and then BCX-300 will be in pairing mode as
BLUE & RED LED light rapidly flash alternately.
3. Set the mobile phone to search for Bluetooth devices and select "BCX-300".
4. Enter the passkey "0000(Four zeros)" and press "OK" to pair BCX-300 with your mobile phone.
BCX-300 will make the short beep sound twice rapidly and then the BLUE LED light will flash
once every 10 seconds.
4
(Power) button for 7~8 seconds until BLUE & RED
US / GB
Using BCX-300
1. Answering a call
Briefly press (Call) button, (Volume up) button, or
accept a call.
2. Ending a call
Briefly press (Call) button to end a call.
3. Last number redialing [dependent on the mobile phone]
Press (Call) button for 2~3 seconds until you hear the beep sound twice from the BCX-300
speaker. As the last number redial features will be activated, (1) it will directly redial the very last
dialed or placed call number or (2) it will show you the recent dialed or placed call list on the
mobile phone. Select one on the list and then press
4. Voice dialing [dependent on the mobile phone]
Briefly press (Call) button until you hear the beep sound once from the BCX-300 speaker
and say the registered name on the voice dialing list of the mobile phone. For the best voice
dialing performance, record the voice tag in your mobile phone.
5. Adjusting the volume
Press (Volume up) or (Volume down) button to increase or decrease the speaker volume.
6. MIC mute on & off
To turn MIC on & off, briefly press (MIC mute) button.
US / GB
(Volume down) button once to
(Call) button briefly to make a call.
5