J.COSTA IT530XRP Instrucciones De Montaje página 2

MANUFACTURED BY:
1.Before mounting the variator your must remove
the cover.
4. Fix the J.Costa variator, it must be repect the
washers position as original variator.
T-MAX 530 VARIATOR CUTTING
J.CO STA VARIATOR ASSEMBLY INSTRUCTIONS
IT530XRP/PRO - IT5307XRP - IT560XRP/PRO - IT605XRP/PRO
2.Remove the installed variator and clean all
grease or oil. Install any washers to the original
location. Always in the same position as it were.
5. Block the correct par pulley.
T-MAX 500 VARIATOR CUTTING
3. Introducir arandela J.Costa.
6. Fix the tool for bloquing the variator and tighten
with the dynamometric tool to 16kg/160Nm.
T-MAX 560 VARIATOR CUTTING