deerdance JJ-5050ST-RGB-12-WIFI02 Guía De Uso Y Cuidado página 4

SETTING UP
1.
Select the location where the strip will be
mounted. Assure that all mounting areas
are free from debris and dust.
2.
Stick the LED strip and press with force,
and then press the whole LED stirp
repeatedly.
12V+
G
R
B
6.
Connect DC Adaptor to Controller.
eye
3.
Remove the paper covering on the back of the
strip. Be sure to carefully place each strip in place
as the adhesive is permanent and cannot be
12V+
G moved.
R
B
4.
Press strip firmly in place and hold for 5 seconds
so that the tape adheres to the mounting surface.
5.
Connect controller to strip making sure the +RGB
on the end matches the connecting strip.
7.
Plug in DC Adaptor.