How To Cook; Important - Newlux SmartChef Digital V100 Manual De Instrucciones

hOW tO cOOK

Cooking with Newlux SmartChef Digital V100 is very simple: just enter the ingredients for the recipe, set the
menu, time and temperature and wait for the appliance to cook for you. Once the cooking process is finished,
the appliance will automatically keep the food warm,
IMPORTANT: To remove any harmful substances before cooking, set the bowl correctly and run the Auto
Clean programme.
1. Make sure the voltage is correct and plug the appliance into the mains. The appliance will beep and enter
Standby mode, with the button
2. Press the button to turn on the control panel.
3. Use the and buttons to select the desired menu, which will flash. Press the XX^ button to start Slow
MENÚ MENÚ
cooking and go forward, if you press
4. Before the display stops flashing, select the temperature (I - II - III) with the
5. Adjust the time with the
6. Press to confirm. If you do not touch anything, the appliance will automatically start cooking when it
stops flashing after a few seconds.
7. When the appliance has finished cooking, 'bb' will appear on the display; then you can open the lid.
8. The cursor will be shown on the display moving until the temperature is reached. Once the appliance has
reached the ideal cooking conditions, the cooking time will appear on the display, which will decrease.
9. When the time is up, the appliance automatically keeps the food warm until you cancel it.
Press the OFF button to cancel during the selection process. If the appliance is cooking and you want to stop
CALENTAR
it, press and hold this button for a few seconds, the control panel will appear again.
flashing.
it starts in Yoghurt and goes backwards.
MENÚ
and , buttons, as indicated in the recipe.
MIN.
HORA
button.
TEMP
31 |