Descargar Imprimir esta página

Orbegozo SE 1150 Manual De Instrucciones página 17

Publicidad

Idiomas disponibles

Idiomas disponibles

SE 1150
2. Switch the appliance on by selecting the desired setting.
a. Position 1, low speed and warm air flow, to shape your hairstyle.
b. Position 2, high speed and very hot air flow, for quick drying.
3. Dry your hair by making brushing movements while holding the dryer
at a small distance from your hair.
4. When you finish, select in switch 0 position and unplug the hairdryer.
STYLING ATTACHMENTS
Concentrator
The concentrator enables you to direct the airflow at your hair that you
are styling.
Connect the concentrator by simply snapping it onto the appliance.
Disconnect it by pulling it off.
Diffuser
The diffuser enables to distribute the air flow by greater surface of hair. It
is recommended use it to dry and shape curling hair. Connect it snapping
onto the appliance. Disconnect it by pulling it off.
With both accessories you should wait to cool those down before remove
them because they will be hot after using and you could burn.
CLEANING
1. Unplug the appliance before cleaning.
2. Remove the grill in order to eliminate the dust and hair.
3. The appliance can be cleaned with a dry cloth.
4. The attachments can be cleaned with a moist cloth or rinsed under a
running tap.
Remove the attachments from the appliance before cleaning them. Make
sure the attachments are dry before using or storing them.
Never rinse the appliance with water.
STORAGE
When not in use "unplug it."
Allow the appliance to cool and store it in a dry location. This hair dryer
features a loop allowing it to be conveniently hung on a hook for easy
access. Never wrap the cord around the appliance since this will cause
the cord to wear prematurely and break. If the supply cord of this
appliance becomes damaged the appliance must be replaced by its
17

Publicidad

loading