Application; Start Application; Cancel Application - Live Photonic H200 Instrucciones De Uso

Energizador de agua
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4.0 Application:

Bergkris
16:30
Bergkris
16:30
...
Bergkris
00:00
Bergkris
16:30
Bergkris
10:00
Bergkris
16:30
4.1 Application:
The selected application is shown on the display. Likewise
the duration of the application.
Example: „Bergkristall", duration 16 minutes, 30 seconds.
The application is ready to start when the cursor flashes
on the hourglass next to the time display.
 You can select further options by briefly pressing the
button
(see 4.4 to
4.6).

4.2 Start application:

Select the desired application so that it is shown on the
display.
Place the vessel with the water to be energized in the
middle of the marking circles on the device.
It is essential that you follow the

Hold the button down for more than 2 seconds to
2s
start the application.
The application is running. The remaining time is shown
on the display. The device stops automatically at the end
of the time with an acoustic signal. You can now take the
energized water from the device and use it.
 By briefly pressing the button, the device is ready again
to start another application.
The device switches off automatically after 10 minutes if it
is no longer used.

4.3 Cancel application:


You can abort the current application prematurely
2s
by pressing the button for longer than 2 seconds while
the application is running.
25
safety
instructions!

Publicidad

Tabla de contenido
loading

Tabla de contenido