done, the camera will not detect immediately. It will detect again 30 seconds after
the video in order to save battery.
(2) „Target Recording Time" is equivalent to a Timer. The camera only works within
the set time period.
(3) If you use several cameras at the same time and you want to recognize which
camera took which photos and videos, setting up a serial number could help you.
The serial number will be visible on the bottom right of the photos and videos.
FAQ
1. I can't turn on my camera!
Please check the voltage of the batteries.
Please check if the polarity of the batteries is correct.
Please re-install the batteries.
2. My camera is not taking photos or recording videos!
Please check if the microSD card is Class 10.
Check if the microSD card works normally with other devices.
Format the microSD card via the camera settings.
3. The camera doesn't detect anything!
Please make sure that the camera is not behind glass.
Please check the setting in the menu to adjust the detection sensibility oft he
camera and then try again.
8