MIRAGLIO 0030130900 Instrucciones De Montaje

Descargar este manual

Power Windows | Leve-glace Electrique | Elektrische Fensterheber | Elevalunas Electricos

Máquina De Vidro Elétrico | Elektrische Raamheffers | Alzacristalli Elettrici

2 doors, 2 portes, 2 türen, 2 puertas, 2 portas, 2 deuren, 2 porte

Pour / For

Volkswagen

Volkswagen Beetle

(1998>10/2011)

Solo meccanismo per motori originali con

elettronica / Mechanical part only. Replaces

window regulator already provided with original

motor with electronic box / Solo mecanismo

para motor original con sistema confort

LH 1C0837655A

RH 1C0837656A

LH 1C0837655C

RH 1C0837656C

14 w01

left door - portière gauche - linke tür - puerta lado izquierdo - porta esquerda - linkerportier - porta lato sinistro

THIS INSTALLATION INSTRUCTION IS FOR BOTH LEFT AND RIGHT SIDE.

CETTE INSTRUCTION DE MONTAGE EST POUR LES DEUX COTES DROIT ET GAUCHE.

DIESE MONTAGE-ANLEITUNG IST FÜR DIE BEIDE LINKE UND RECHTE SEITE.

ESTA INSTRUCCION DE MONTAJE ES PARA LOS DOS LADOS IZQUIERDO Y DERECHO.

ESTAS INSTRUÇÕES VALEM TANTO PARA O LADO ESQUERDO QUANTO PARA O DIREITO.

LA PRESENTE ISTRUZIONE VALE SIA PER IL LATO SINISTRO CHE PER IL LATO DESTRO.

0030130900

Página 1 Máquina De Vidro Elétrico | Elektrische Raamheffers | Alzacristalli Elettrici 2 doors, 2 portes, 2 türen, 2 puertas, 2 portas, 2 deuren, 2 porte 0030130900 Pour / For left door - portière gauche - linke tür - puerta lado izquierdo - porta esquerda - linkerportier - porta lato sinistro Volkswagen THIS INSTALLATION INSTRUCTION IS FOR BOTH LEFT AND RIGHT SIDE.
Página 2 VK708 23/03/2020 ENGLISH ENGLISH THIS INSTALLATION INSTRUCTION IS FOR BOTH LEFT AND RIGHT SIDE. A) WARNING: DO NOT OPERATE THE WINDOW REGULATOR BEFORE IT IS COMPLETELY ASSEMBLY ON VEHICLE. Remove door trim. Detach original wiring from the closing side of the metal panel. Release the glass and remove metal panel from the door. Drill original fixing rivets and remove window regulator. B) Fix ONLY LOWER SIDE of the two power windows rails onto the panel, into positions 3 and 4 leaving the screws turned out the most as possible using the nuts provided..