How To Use - LUSTRE ClearSkin Manual Del Usuario

How to use

LUSTRE ClearSkin
Step 1 — Ensure skin is clean and
dry and all make up is removed
before treatment.
Step 3 — Remove the cover paper
and place LUSTRE ClearSkin over
the treatment area, press down.
Step 5 — LUSTRE will turn off
automatically after 20 mins.
A short beep will signal the
end of the treatment.
www.lustreclearskin.com
Step 2 — Attach a LUSTRESTRIP to
the LUSTRE ClearSkin device. Peel
the blue tab together with the cover
paper from the backing sheet and
apply to the device.
Step 4 — Press the ON/OFF button
for 1 second to begin treatment.
The device should only be switched
on AFTER it has been affixed to the
treatment area of skin.
Step 6 — To remove The LUSTRE
ClearSkin device from the
treatment area carefully and very
slowly pull the LUSTRESTRIP using
the adhesive strip tab. Remove and
discard the LUSTRESTRIP.
8
Cautions and
contraindications
Read all of the instructions before
using LUSTRE ClearSkin. Please
consult your healthcare provider
before using LUSTRE ClearSkin
if you have been prescribed any
medication for Acne.
• Pigment darkening caused by
visible wavelengths, i.e. blue
light, may be seen in darker
skin types and is transient.
• Blue light therapy has not been
tested with pregnant women.
We recommend that you speak
with your GP or midwife before
considering using LUSTRE if
you are pregnant.
• Not recommended for children
under 13 years old. If you are
unsure, please speak to a
healthcare professional.
Contraindications
Do Not use LUSTRE ClearSkin
if you have a history of porphyria,
solar urticaria, chronic actinic
dermatitis, photosensitivity.
Do Not use LUSTRE ClearSkin
over any suspicious or cancerous
lesions.
Do Not use LUSTRE ClearSkin
if you are taking Amiodarone.
www.lustreclearskin.com
Do Not use LUSTRE ClearSkin
if you are taking any
photosensitising treatment.
Do Not use LUSTRE ClearSkin
over or near a recent steroid
injection.
Do Not use LUSTRE ClearSkin
if you suspect that you have
had an adverse/allergic reaction.
Warnings
The operator is considered
the patient.
Do Not place LUSTRE ClearSkin
over the eyes, or where the light
will shine into the eyes during
treatment.
Do Not look directly at the LED
screen when it is switched on.
Always keep LUSTRE ClearSkin
away from water and moisture.
Never insert objects into the
openings of the LUSTRE ClearSkin.
Never use LUSTRE ClearSkin if it
appears damaged or if any of the
power cables appear damaged
Never disassemble LUSTRE
ClearSkin.
Do Not allow any fluid to enter
LUSTRE ClearSkin at any time.
If this happens do not use.
Under normal use the LUSTRE
ClearSkin will not exceed
a temperature of 43°C.
9