Getting Started; Change The Language; Set The Time - Chrysler RB2 Manual Del Usuario

GETTING STARTED

NOTE:
The ignition switch must be in the ON or
ACC position to operate the radio.
If the unit is OFF, switch it ON by pushing the
ON/OFF VOLUME rotary knob.

Change the Language

The radio will conform to the vehicle language
set in the Electronic Vehicle Information Center
(EVIC), if equipped.
If you change the language in the radio, the
vehicle will change the language for all display
information. Refer to the vehicles Owner's
Manual.
To change the language with the radio:
1. Press the MENU hard-key on the right side
of the radio.
2. Then press the System Setup soft-key to get
to the System Setup menu.
All manuals and user guides at all-guides.com
3. Press the Language soft-key and select a
language.

Set the Time

1. Press the Time Display soft-key in the lower
left corner of the screen.
2. Adjust the hours and minutes using the up
and down soft-keys.
3. Press the Set Time Zone soft-key to change
to the desired time zone.
4. Press the Daylight Savings soft-key to switch
Daylight Savings on or off.
9