Publicidad
Idiomas disponibles
Idiomas disponibles
Screw the two casters with brake (20) into lower end of leg
set (3,4). Make sure you do it on the front view as marked.
Screw the two casters without break (19) into lower end of
leg sets (3,4). Make sure you do it on the rear view as marked.
A
Assemble front and back support rail (5) with top of leg
sets using eight M6*12mm hexagon screws (A) inside and
using eight M6*50mm hexagon screws (H) outside.
6
3, 4
19, 20
H
5
3
Assemble the two sets of legs with the bottom shelf (2)
using eight M6*12 hexagon screws (A) and washers (F).
1
Carefully place the main body (1) on the lower structure.
Assemble them together using four M6*60mm hexagon
screws (I) and nut (E).
A
F
4
2
I
Publicidad
