Blumfeldt Springbreak Manual página 7

Lid handle
1
Cover
2
M5x40 screws
3
Handle
4
Box
5
Bottle opener
6
ASSEMBLY
1 Check that all the parts listed are present.
2 The handles (4) and the bottle openers (6) are pre-assembled on the box
(5).
3 Turn the box over and place it on a soft, smooth surface. Mount the legs (9)
to the box (5) one after the other. To do this, use the M6x12 screws (8) and
tighten them with a spanner.
4 Place the support frame (10) on the legs. Screw on the rollers (11, 12)
through the holes.
5 Attach the bottle cap container (9) to the box (5) by pulling the container
over the two pre-assembled screws.
6 Attach the two lid handles (1) to the lid. Use 2 5/32" x 1/2" screws.
7 Clean the inside of the box completely with a soft, dry cloth. Put the lid (2)
on the box.
8 The drinks trolley is now ready for use.
Container for bottle tops
7
M6x16 screws
8
Legs
9
Support frame
10
Free rollers
11
Locking rollers
12
EN
7