Problem & Solution - One for All SV 1740 Guía Del Usario

If your house has a heavy metal construction or is equipped with a wireless PC
network, it can disturb the radio signal. Even moving the units a few inches
can improve the performance. If this doesn't work try to move the USB
Transmitter and Receiver to another place in the house. If you experience
problems, try placing the units away from electrical appliances.
No audio on your audio amplifier.
- Make sure that the USB Transmitter is connected to a PC and Receiver is switched
on by connecting it to the AC / DC adapter.
- Select the right audio input on your audio set.
- Be sure the PC audio output is not muted.
- Make sure that all cables are connected correctly and that the PC is playing
an audio file.
- Make sure that the distance between the USB Transmitter and Receiver unit
is less than 100 ft (30 m) line of sight.
- If there is no sound coming out of the speakers of your audio amplifier please
choose another channel by pushing the CH button on the USB Transmitter.
You can select one of the 8 possible channel frequencies (2410, 2419 ~ 2473 MHz).
The Receiver can auto scan the channel that the USB Transmitter is transmitting.
No audio on your PC speakers.
- When plugging in the USB Transmitter to a PC the PC speakers will be switched off and
the audio will be transmitted via the USB Transmitter.
Please follow the manual instructions carefully. For questions regarding
the SV-1740 please contact:
- ofahelp@uebv.com (just send a blank message – you will receive an auto reply)
- www.oneforall.com
WWW.ONEFORALL.COM
All manuals and user guides at all-guides.com
Problem & Solution
5