Publicidad
Idiomas disponibles
Idiomas disponibles
EMU SHADE UMBRELLA
IMPORTANT: Please read this entire manual before installing or operating your EMU Shade
Umbrella.
Upon receipt of your SHADE, please check to ensure you have received all the components. If anything
is missing or damaged, contact your seller.
SHADE UMBRELLA WIND RESISTANCE GUIDELINES: Light to Moderate Winds
When installed properly, the Shade Umbrella is engineered to handle light to moderate wind conditions in
the open canopy position. Please adhere to these common sense wind guidelines:
1. As winds get stronger or in anticipation of uncertain/severe weather conditions, the canopy should be
lowered to the folded position and strapped to the mast.
2. The Shade Umbrella should always be left in the folded and strapped position when unattended or not
in use.
3. In anticipation of and during extremely severe weather conditions, it is advisable to remove and store
the entire Shade Umbrella structure to protect it from storm-related debris.
COMPONENTS, FITTINGS & HARDWARE
A. CAP: This aluminium CAP saves the fabric cover top from injures due to the movement.
B. SCREW: One (1) rounded head screw is used to assemble the CAP to the umbrella.
A. CAP
CAP ASSEMBLING
SHADE is provided with the not-assembled aluminium CAP, which need to protect the top fabric cover
from any injure.
Before installing the SHADE on the basement, it needs to assemble the CAP by screw and hexagonal
key. To assemble the cap we suggest to put the umbrella over the carton board of the packaging to
avoid any injures to the fabric cover.
1
1
B. SCREW
n.1 ROUNDED HEAD
SCREW
2
3
2
Publicidad
