Video Settings - National Geographic EXPLORER 6 Instrucciones De Uso

Video settings

To access the video settings, press [ ] repeatedly until the video settings icon [ ] is selected. Now press "OK" [ ] to open the
menu.
EXPLORER 6
EV (Exposure): -3 ~ +3
By default, your camera uses the entire image to determine the appropriate exposure level. However, EV allows you to select a value that
the camera will give priority to when determining exposure. This setting is especially useful for shots where an important area might
otherwise be over- or under-exposed. If you change this setting, the LCD screen will immediately show you the effect on your image. When
you leave this mode at "0", the camera uses the entire scene again to determine the correct exposure.
EIS (Electronic image stabilisation) : On/Off
This camera is equipped with an EIS function with a 6-axis gyroscope to detect changes in motion. If the camera tilts, moves, shakes or
shakes, the sensor uses a cross-border image compensation algorithm to compensate for the change and produce stable video, especially
for activities with relatively small angles (about 6 degrees) but fast movements such as cycling, motorcycling and handheld applications.
Note:
• 1080P 60fps/720P 120fps, loop video, fast motion video, TL duration and slow motion are not supported by EIS!
38