Repair, Maintenance And Storage - Norstep 57723 Manual De Instrucciones

Important!
When the product is used as a ladder, the
transport wheels must be removed.

Repair, maintenance and storage

Repairs and maintenance shall be
carried out by a competent person and
be in accordance with the producer's
instructions.
NOTE! A competent person is someone
who has the skills to carry out repairs or
maintenance. e.g. by a training by the
manufacturer.
For repair and replacement of parts, e.g.
feet, if necessary contact the producer or
distributor.
Ladders should be stored in accordance with
the producer's instructions
Ladders made of or using thermoplastic.
thermosetting plastic and reinforced plastic
materials should be stored out of direct
sunlight.
Ladders made of wood should be stored
in a dry place and shall not be coated with
opaque and vapour tight paints.
For regular inspection, the following items
shall be taken into account:
• Check that the stiles/legs (uprights)
are not bent, bowed, twisted, dented,
cracked, corroded or rotten;
• Check that the stiles/legs around the
� xing points for other components are in
good condition;
• Check that � xings (usually rivets, screws
or bolts) are not missing, loose, or
corroded;
• Check that rungs/steps are not missing,
loose, excessively worn, corroded or
damaged;
• Check that the hinges between front and
rear sections are not damaged, loose or
corroded;
• Check that the locking stays horizontal,
back rails and corner braces are not
missing, bent, loose, corroded or
damaged;
• Check that the rung hooks are not
missing. damaged, loose or corroded and
engage properly on the; rungs;
• Check that guide brackets are not
missing, damaged, loose or corroded and
engage properly on the mating stile;
• Check that ladder feet / end caps are
not missing, loose, excessively worn,
corroded or damaged;
• Check that the entire ladder is free from
contaminants (e.g. dirt, mud, paint, oil or
grease);
• Check that locking catches (if � tted) are
not damaged or corroded and function
correctly;
• Check that the platform (if � tted) has
no missing parts or � xings and is not
damaged or corroded.
If any of the above checks cannot be fully
satis� ed, you should NOT use the ladder.
GB
35