Control Panel - auna Arizona DAB Manual

EN

CONTROL PANEL

Power/Mode
Use the Power/Mode button to turn ON the Jukebox. The default mode
when you switch ON is RADIO. This button also allows you to choose your
desired playback mode. You will scroll through in order: DAB/FM RADIO,
CD/MP3, USB, SD and BT. To power OFF the Jukebox, press and hold down
the Power/Mode button for 3 seconds until the display turns OFF.
/ SCAN
Use the /Scan button to play or pause tracks while in playback modes
CD, USB, SD or BT. The Play/Pause/Scan button is also used when in RADIO
mode to automatically search for stations.
Stop / Info
Use the Stop/Info button to stop tracks playing in playback modes CD, USB,
SD. In DAB/FM status or hold down the Stop/Info button for 3 seconds as
the menu function.
After USB music reading stops, press and hold "Stop /Info" for 3 seconds,
the software update information will appear (make sure it is the latest
version of applicable software).
Prev / Tuner
In FM and DAB playback state,Selection for the previous station,"Menu"
function state, select for theThe previous project .
In CD and USB,SD playback state,press "Prev/ " to play the previous
track.
Press and hold down the this button for 3 seconds to rewind back through
a track,You can then release the button to start play.
In Bluetooth playback state,press "Prev/ " to play the previous track.
Programming/Repeat/Enter
When playing CD, MP3. USB. SD, press PROG once to repeat one song, the
REP indication at the top left corner on the led display will flash. Press the
"Prog" display "REP FOLDER" repeat album. Press "Prog" one more time to
repeat all songs in the track and the REP indication at the top left corner on
the LED display will appear.
Second mortgage to play songs randomly, the LED displays "RAN" on the
bottom of the display.
When playing CD, USB, SD, press STOP to stop. When playing CD. USB.
SD, press "stop" to stop. press the "Prog" Mode button. Tracks can be
22