Publicidad
Idiomas disponibles
Idiomas disponibles
Tips for getting the best results:
Tip #1: Don't overload the tumbler.
The action of the rocks crashing into
each other will give you the best
tumbling results. If the tumbler is too
full, the rocks can't move as freely and
won't polish as well. For best results,
fill your tumbler barrel about 1/2 to 2/3
full. If you overfill the tumbler, the built-
in sensor will automatically protect the
motor inside by turning the tumbler
off. If this happens, you should remove
some of the rocks, unplug the tumbler,
and plug it in again. This will reset the
tumbler.
Tip #2: Use your own judgment.
Use the tumbling guide below as
a place to start, but use your own
judgment to determine if your rocks
need more time on each grit cycle
(especially when you're tumbling new
types of rocks). Some rocks are harder
than others, so they'll take more time to
polish than softer rocks.
Tip #3: Always wash a few "test"
stones before changing grit.
The purpose of the roughest grit (#1)
is to completely round all of the edges.
Whenever you finish a grit cycle, always
grab a few test stones and rinse them
off before you dump out all of the grit
and water. Carefully inspect these test
stones to determine if you think they're
smooth enough. If you don't think
they're finished, simply put them back
in the barrel and run the batch for more
time. Repeat this process with each
grit. Each grit will get you a smoother
and smoother polish. Generally
speaking, longer is always better.
Tip #4: Adjust the speed for faster
polishing times and better results!
This professional tumbler features
an innovative speed control that will
allow you to increase your tumbling
speeds and get better results. When
you're using the first grit, you can set
the tumbler on the fastest setting in
order to round the edges of the rocks
as quickly as possible. When using
the final two grits, you should use the
slowest setting to get better polishing
results.
Tip #5: Adding a small bit of mineral
oil to your finished stones will help give
them a nice, shiny look.
Suggested Tumbling Times:
Grit #1: 3–5 days on the highest speed
(until the stones have all lost their sharp
edges and feel smooth)
Grit #2: 6–8 days on medium speed
Grit #3: 6–8 days on the slowest speed
Grit #4: 7–10 days on the slowest speed
(the slow speed and long polishing time
will help you get the best results)
FAQ's
Q: What do I do if the tumbler belt
?
breaks
A: There is a replacement belt included
in your kit. Simply remove the broken
tumbler belt and replace it with the new
one.
Q: My tumbler is displaying an "E"; how
?
can I fix it
A: This rock tumbler is designed to stop
and display an "E" in the event that the
barrel is overloaded. Remove some
rocks and/or water, unplug the unit, and
then plug it in and restart your cycle.
Q: Will this work with glass to create
"sea glass" like you find at the beach
A: Yes. We recommend doing a little
research to determine the appropriate
tumbling times and optimal type of grit.
Q: Can I buy spare parts separately
Where can I get more stones and grit
A: You can find refill packs containing
stones, grit, and jewelry fastenings
at our Amazon store. If you need a
replacement part please contact us at
3
?
?
?
Publicidad
